Items where Author is "Abu Bakar Sulong, "

Article

Nurul Nadiah Mahmud, and Abu Bakar Sulong, and Ameyama, Kei (2023) Powder injection moulded Ti6Al4V-HA composite for implants. Sains Malaysiana, 52 (5). pp. 1557-1565. ISSN 0126-6039

Nisa Naima Khalid, and Farhana Mohd Foudzi, and Ariffuddin Hasran, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, (2023) Rheological test of flowability and diffusion behavior of carbon fibre reinforced polyamide. Jurnal Kejuruteraan, 35 (1). pp. 215-222. ISSN 0128-0198

Nisa Naima Khalid, and Fatin Zahidah Awang Adi, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, (2023) Shear test characterization of 3d printed polyamide reinforced carbon fiber composites. Jurnal Kejuruteraan, 35 (2). pp. 431-436. ISSN 0128-0198

Edy Herianto Majlana, and Wan Ramli Wan Daud, and Teuku Husaini, and Masli Irwan Rosli, and Abu Bakar Sulong, and Mohd Shahbudin Mastar, and Darwin Sebayang, and Nurato.Nurato, (2023) Static stress analysis of membrane electrode assembly (MEA) and gasket in Proton exchange membrane fuel cell stack assembly pressure. Jurnal Kejuruteraan, 35 (1). pp. 223-230. ISSN 0128-0198

Nisa Naima Khalid, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Farhana Mohd Foudzi, (2022) Prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu : suatu ulasan ringkas. Sains Malaysiana, 51 (5). pp. 1545-1556. ISSN 0126-6039

Abu Bakar Sulong, and Nashrah Hani Jamadon, and Norhamidi Muhamad, and Al Basir, (2022) Physical properties of sintered stainless steel 17-4PH micro-part processed by micro-powder injection molding. Jurnal Kejuruteraan, 34 (6). pp. 1209-1214. ISSN 0128-0198

Nisa Naima Khalid, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Farhana Mohd Foudzi, and Mohd Zamzuri Ahmad Shukri, (2022) Reinforced composite as a feeder for 3D printing application. Jurnal Kejuruteraan, 34 (4). pp. 671-678. ISSN 0128-0198

Nisa Naima Khalid, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Farhana Mohd Foudzi, and Mihirssen Gunasegran, (2022) Simulation analysis of graphene addition on polymeric composite. Jurnal Kejuruteraan, 34 (5). pp. 941-947. ISSN 0128-0198

Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Iswandi, (2021) Effect of multi-sized graphite filler on the mechanical properties and electrical conductivity. Sains Malaysiana, 50 (7). pp. 2025-2034. ISSN 0126-6039

Tan, Koon Tatt and Norhamidi Muhamad, and Andanastuti Muchtar, and Abu Bakar Sulong, and Kok, Yih Shia (2021) Production of porous stainless steel using the space holder method. Sains Malaysiana, 50 (2). pp. 507-514. ISSN 0126-6039

Nur Fawwaz Asri, and Teuku Husaini, and Abu Bakar Sulong, and Majlan, Edy Herianto (2020) Effects of the synthesis coating parameters for metal bipolar plates. Sains Malaysiana, 49 (12). pp. 3179-3188. ISSN 0126-6039

Mohd Ikram Ramli, and Farhana Mohd Foudzi, and Abu Bakar Sulong, and Fatin Aqilah Abdul Yazid, and Norhamidi Muhamad, and Hui, David (2020) Characterization of titanium alloy-hydroxyapatite composite through powder injection molding. Jurnal Kejuruteraan, 32 (4). pp. 735-742. ISSN 0128-0198

Najlaa Nazihah Mas’ood, and Abu Bakar Sulong, and Norhamidi Muhamad, and Farhana Mohd Foudzi, and Intan Fadhlina Mohamed, and Al-Furjan M.S.H, (2020) Debinding process of co-powder injection molded (2C-PIM) SS17-4PH and SS316L. Jurnal Kejuruteraan, 32 (4). pp. 607-611. ISSN 0128-0198

Muhammad Omar Abdul Rashid, and Norhamidi Muhamad, and Abu Bakar Sulong, and Nor Nabilla Kadiman, (2020) Effect of mechanical properties with addition of graphene nano-platelets in Cu/ GNPs composite- green part. Jurnal Kejuruteraan, 32 (4). pp. 651-655. ISSN 0128-0198

Nashrah Hani Jamadon, and Nurul Izaan Abdullah Halid, and Abu Bakar Sulong, and Mohd Hamdi Abd Shukor, and Miyashita, Yukio (2020) Evaluation of sintered hydroxyapatite (HA) via powder injection molding. Jurnal Kejuruteraan, 32 (4). pp. 671-676. ISSN 0128-0198

Al Basir, and Abu Bakar Sulong, and Etta Eshak, and Najlaa Nazihah Mas’ood, and Nashrah Hani Jamadon, and Norhamidi Muhamad, (2020) Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders. Jurnal Kejuruteraan, 32 (2). pp. 335-339. ISSN 0128-0198

Nur Fawwaz Asri, and Teuku Husaini, and Abu Bakar Sulong, and Edy Herianto Majlan, and Wan Ramli Wan Daud, (2020) Single stack performance using chromium carbide (Cr‒C) and niobium carbide (Nb‒C) coated on 316 L bipolar plates. Jurnal Kejuruteraan, 32 (4). pp. 591-597. ISSN 0128-0198

Dulina Tholibon, and Izdihar Tharazi, and Abu Bakar Sulong, and Norhamidi Muhamad, and Nur Farhani Ismail, and Mohd Khairul Fadzly Md Radzi, and Nabilah Afiqah Mohd Radzuan, and Hui, David (2019) Kenaf fiber composites: a review on synthetic and biodegradable polymer matrix. Jurnal Kejuruteraan, 31 (1). pp. 65-76. ISSN 0128-0198

Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Mahendra Rao Somalu, (2019) Influence the filler orientation on the performance of bipolar plate. Sains Malaysiana, 48 (3). pp. 669-676. ISSN 0126-6039

Mohd Ikram Ramli, and Abu Bakar Sulong, and Norhamidi Muhamad, and Andanastuti Muchtar, and Mohd Yusuf Zakaria, (2018) Pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit. Sains Malaysiana, 47 (11). pp. 2869-2875. ISSN 0126-6039

Zakaria Razak, and Abu Bakar Sulong, and Norhamidi Muhamad, and Che Hassan Che Haron, and Mohd Khairol Fadzly Md Radzi, and Dulina Tholibon, and Izdihar Tharazi, and Nur Farhani Ismail, (2018) The effects of maleic anhydride grafted PP (MAPP) on the mechanical properties of injection moulded kenaf/CNTs/PP composites. Sains Malaysiana, 47 (6). pp. 1285-1291. ISSN 0126-6039

Nor Nabilla Kadiman, and Julie Elvyana Romli, and Norhamidi Muhamad, and Abu Bakar Sulong, and Farhana Mohd Foudzi, (2018) Pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi. Sains Malaysiana, 47 (5). pp. 1039-1043. ISSN 0126-6039

Teuku Husaini, and Shuhaimi, and Abu Bakar Sulong, (2018) Effect of temperature on the mechanical performance of highly conductive composites for HT-PEMFC application. Jurnal Kejuruteraan, 1 (1(SI)). pp. 25-30. ISSN 0128-0198

Nishata Royan Rajendran Royan, and Abu Bakar Sulong, and Nor Yuliana Yuhana, and Mohd Hafizuddin Ab Ghani, and Sahrim Ahmad, (2017) Pengoptimumam pemprosesan komposit rHDPE berpenguat sekam padi dengan kaedah tindak balas permukaan (RSM). Sains Malaysiana, 46 (10). pp. 1749-1756. ISSN 0126-6039

Farrahshaida Mohd Salleh, and Abu Bakar Sulong, and Muhammad Rafi Raza, and Norhamidi Muhamad, and Lim, Tsiu Fhang (2017) Effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding. Sains Malaysiana, 46 (9). pp. 1651-1657. ISSN 0126-6039

Raza, Muhammad Rafi and Faiz Ahmad, and Norhamidi Muhamad, and Abu Bakar Sulong, and M.A. Omar, and Akhtar, Majid Niaz and Muhamad Aslam, and Sherazi, Irfan (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - stainless steel. Sains Malaysiana, 46 (2). pp. 285-293. ISSN 0126-6039

Emeka, Ukwueze Bonaventure and Abu Bakar Sulong, and Norhamidi Muhamad, and Zainuddin Sajuri, and Farrahshaida Salleh, (2017) Two component injection moulding of bi-material of stainless steel and yttria stabilized zirconia – green part. Jurnal Kejuruteraan, 29 (1). pp. 49-55. ISSN 0128-0198

Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, and Mahendra Rao Somalu, (2016) Pengoptimuman proses penyemperitan gentian karbon terkisar dan polipropilena bagi komposit polimer pengalir. Sains Malaysiana, 45 (12). pp. 1913-1921. ISSN 0126-6039

Gaaz, Tayser Sumer and Abu Bakar Sulong, and Abdul Amir H. Kadhum, (2016) Effect of HNTs addition in the injection moulded thermoplastic polyurethane matrix on the mechanical and thermal properties. Sains Malaysiana, 45 (8). pp. 1235-1242. ISSN 0126-6039

Tan, Koon Tatt and Norhamidi Muhamad, and Andanastuti Muchtar, and Abu Bakar Sulong, and Neo, Ming Cherng (2016) Influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method. Sains Malaysiana, 45 (4). pp. 653-658. ISSN 0126-6039

Wong, Yee Ning and Norhamidi Muhamad, and Abu Bakar Sulong, and Abdolali Fayyaz, and Muhammad Rafi Raza, (2015) Effects of vanadium carbide on sintered WC-10%Co produced by micro-powder injection molding. Sains Malaysiana, 44 (4). pp. 1175-1181. ISSN 0126-6039

Nurul Akidah Baharuddin, and Hamimah Abd. Rahman, and Andanastuti Muchtar, and Abu Bakar Sulong, and Huda Abdullah, (2014) Kesan masa pengendapan dan saiz elektrod lawan dalam penghasilan katod komposit LSCF-SDC karbonat untuk SOFC. Sains Malaysiana, 43 (4). pp. 595-601. ISSN 0126-6039

Hafizawati Zakaria, and Norhamidi Muhamad, and Abu Bakar Sulong, and Mohd Halim Irwan Ibrahim, and Farhana Foudzi, (2014) Moldability characteristics of 3 mol% Yttria Stabilized Zirconia feedstock for micro-powder injection molding process. Sains Malaysiana, 43 (1). pp. 129-136. ISSN 0126-6039

Muhammad Ilman Hakimi Chua, and Abu Bakar Sulong, and Mohd Fazuri Abdullah, and Norhamidi Muhamad, (2013) Optimization of injection molding and solvent debinding parameters of stainless steel powder (SS316L) based feedstock for metal injection molding. Sains Malaysiana, 42 (12). pp. 1743-1750. ISSN 0126-6039

Norazyan Rudi Hartono, and Nisa Naima Khalid, and Nabilah Afiqah Mohd Radzuan, and Abu Bakar Sulong, (2003) 3D Printed carbon fibre reinforced polyamides in high temperature Poliamida diperkuat gentian karbon cetakan 3D pada suhu tinggi. Jurnal Kejuruteraan, 35 (6). pp. 1351-1361. ISSN 0128-0198