Items where Author is "Norhamidi Muhamad, "

Article

Abu Bakar Sulong, and Nashrah Hani Jamadon, and Norhamidi Muhamad, and Al Basir, (2022) Physical properties of sintered stainless steel 17-4PH micro-part processed by micro-powder injection molding. Jurnal Kejuruteraan, 34 (6). pp. 1209-1214. ISSN 0128-0198

Tan, Koon Tatt and Norhamidi Muhamad, and Andanastuti Muchtar, and Abu Bakar Sulong, and Kok, Yih Shia (2021) Production of porous stainless steel using the space holder method. Sains Malaysiana, 50 (2). pp. 507-514. ISSN 0126-6039

Mohd Ikram Ramli, and Farhana Mohd Foudzi, and Abu Bakar Sulong, and Fatin Aqilah Abdul Yazid, and Norhamidi Muhamad, and Hui, David (2020) Characterization of titanium alloy-hydroxyapatite composite through powder injection molding. Jurnal Kejuruteraan, 32 (4). pp. 735-742. ISSN 0128-0198

Najlaa Nazihah Mas’ood, and Abu Bakar Sulong, and Norhamidi Muhamad, and Farhana Mohd Foudzi, and Intan Fadhlina Mohamed, and Al-Furjan M.S.H, (2020) Debinding process of co-powder injection molded (2C-PIM) SS17-4PH and SS316L. Jurnal Kejuruteraan, 32 (4). pp. 607-611. ISSN 0128-0198

Muhammad Omar Abdul Rashid, and Norhamidi Muhamad, and Abu Bakar Sulong, and Nor Nabilla Kadiman, (2020) Effect of mechanical properties with addition of graphene nano-platelets in Cu/ GNPs composite- green part. Jurnal Kejuruteraan, 32 (4). pp. 651-655. ISSN 0128-0198

Al Basir, and Abu Bakar Sulong, and Etta Eshak, and Najlaa Nazihah Mas’ood, and Nashrah Hani Jamadon, and Norhamidi Muhamad, (2020) Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders. Jurnal Kejuruteraan, 32 (2). pp. 335-339. ISSN 0128-0198

Dulina Tholibon, and Izdihar Tharazi, and Abu Bakar Sulong, and Norhamidi Muhamad, and Nur Farhani Ismail, and Mohd Khairul Fadzly Md Radzi, and Nabilah Afiqah Mohd Radzuan, and Hui, David (2019) Kenaf fiber composites: a review on synthetic and biodegradable polymer matrix. Jurnal Kejuruteraan, 31 (1). pp. 65-76. ISSN 0128-0198

Mohd Ikram Ramli, and Abu Bakar Sulong, and Norhamidi Muhamad, and Andanastuti Muchtar, and Mohd Yusuf Zakaria, (2018) Pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit. Sains Malaysiana, 47 (11). pp. 2869-2875. ISSN 0126-6039

Zakaria Razak, and Abu Bakar Sulong, and Norhamidi Muhamad, and Che Hassan Che Haron, and Mohd Khairol Fadzly Md Radzi, and Dulina Tholibon, and Izdihar Tharazi, and Nur Farhani Ismail, (2018) The effects of maleic anhydride grafted PP (MAPP) on the mechanical properties of injection moulded kenaf/CNTs/PP composites. Sains Malaysiana, 47 (6). pp. 1285-1291. ISSN 0126-6039

Nor Nabilla Kadiman, and Julie Elvyana Romli, and Norhamidi Muhamad, and Abu Bakar Sulong, and Farhana Mohd Foudzi, (2018) Pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi. Sains Malaysiana, 47 (5). pp. 1039-1043. ISSN 0126-6039

Mohd Khairul Fadzly Md Radzi, and Norhamidi Muhamad, and Akhtar, Majid Niaz and Zakaria Razak, and Farhana Mohd Foudzi, (2018) The effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites. Sains Malaysiana, 47 (2). pp. 367-376. ISSN 0126-6039

Sarizal Md Ani, and Andanastuti Muchtar, and Norhamidi Muhamad, and Jaharah A. Ghani, (2017) Kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina-zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik. Sains Malaysiana, 46 (10). pp. 1979-1986. ISSN 0126-6039

Farrahshaida Mohd Salleh, and Abu Bakar Sulong, and Muhammad Rafi Raza, and Norhamidi Muhamad, and Lim, Tsiu Fhang (2017) Effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding. Sains Malaysiana, 46 (9). pp. 1651-1657. ISSN 0126-6039

Raza, Muhammad Rafi and Faiz Ahmad, and Norhamidi Muhamad, and Abu Bakar Sulong, and M.A. Omar, and Akhtar, Majid Niaz and Muhamad Aslam, and Sherazi, Irfan (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - stainless steel. Sains Malaysiana, 46 (2). pp. 285-293. ISSN 0126-6039

Emeka, Ukwueze Bonaventure and Abu Bakar Sulong, and Norhamidi Muhamad, and Zainuddin Sajuri, and Farrahshaida Salleh, (2017) Two component injection moulding of bi-material of stainless steel and yttria stabilized zirconia – green part. Jurnal Kejuruteraan, 29 (1). pp. 49-55. ISSN 0128-0198

Tan, Koon Tatt and Norhamidi Muhamad, and Andanastuti Muchtar, and Abu Bakar Sulong, and Neo, Ming Cherng (2016) Influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method. Sains Malaysiana, 45 (4). pp. 653-658. ISSN 0126-6039

Wong, Yee Ning and Norhamidi Muhamad, and Abu Bakar Sulong, and Abdolali Fayyaz, and Muhammad Rafi Raza, (2015) Effects of vanadium carbide on sintered WC-10%Co produced by micro-powder injection molding. Sains Malaysiana, 44 (4). pp. 1175-1181. ISSN 0126-6039

Panuh, Dedikarni and Muchtar, Andanastuti and Norhamidi Muhamad, and Majlan, Edy Herianto and Wan Ramli Wan Daud, (2014) Elektrolit Dwi Lapisan Sm0.2Ce0.8O1.90 (SDC)/ Y0.25Bi0.75O1.5 (YSB) untuk Sel Fuel Oksida Pepejal Bersuhu Sederhana. Sains Malaysiana, 43 (11). pp. 1769-1774. ISSN 0126-6039

Sri Yulis M. Amin, and Norhamidi Muhamad, and Khairur Rijal Jamaludin, and Abdolali Fayyaz, and Heng, Shye Yunn (2014) Characterization of the feedstock properties of metal injection-molded WC-Co with palm stearin binder system. Sains Malaysiana, 43 (1). pp. 123-128. ISSN 0126-6039

Hafizawati Zakaria, and Norhamidi Muhamad, and Abu Bakar Sulong, and Mohd Halim Irwan Ibrahim, and Farhana Foudzi, (2014) Moldability characteristics of 3 mol% Yttria Stabilized Zirconia feedstock for micro-powder injection molding process. Sains Malaysiana, 43 (1). pp. 129-136. ISSN 0126-6039

Muhammad Ilman Hakimi Chua, and Abu Bakar Sulong, and Mohd Fazuri Abdullah, and Norhamidi Muhamad, (2013) Optimization of injection molding and solvent debinding parameters of stainless steel powder (SS316L) based feedstock for metal injection molding. Sains Malaysiana, 42 (12). pp. 1743-1750. ISSN 0126-6039

Norita Hassan, and Sahrim Ahmad, and Norhamidi Muhamad, and Mohd Afian Omar, and Noor Azlina Hassan, (2013) Thermoplastic natural rubber (TPNR) as a backbone polymer for metal injection molding. Sains Malaysiana, 42 (12). pp. 1787-1791. ISSN 0126-6039

Sarizal Md Ani, and Andanastuti Muchtar, and Norhamidi Muhamad, and Jaharah A. Ghani, (2013) Pencirian keseragaman campuran dan sifat reologi serbuk alumina-Zirkonia untuk pengacuan suntikan seramik. Sains Malaysiana, 42 (9). pp. 1311-1317. ISSN 0126-6039

Hamimah Abd. Rahman, and Andanastuti Muchtar, and Syaharizan Haron, and Norhamidi Muhamad, and Huda Abdullah, (2012) Kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem LSCF6428 (Effects of processing parameters and additives on electrophoretic deposited LSCF6428 Films). Sains Malaysiana, 41 (2). pp. 237-244. ISSN 0126-6039

Dedikarni Panuh, and Andanastuti Muchtar, and Norhamidi Muhamad, and Wan Ramli Wan Daud, (2012) Kesan rawatan haba terhadap mikrostruktur katod berliang Ag2O3-Bi2O3 di atas substrat keluli kalis karat yang disediakan dengan kaedah pengecatan sluri. Sains Malaysiana, 41 (1). pp. 121-127. ISSN 0126-6039

Jarot Raharjo, and Andanastuti Muchtar, and Wan Ramli Wan Daud, and Norhamidi Muhamad, and Edy Herianto Majlan, (2012) Pencirian fizikal dan terma komposit seramik elektrolit SDC-(Li/Na)2CO3 (Physical and thermal characterisations of SDC-(Li/Na)2CO3 electrolyte ceramic composites). Sains Malaysiana, 41 (1). pp. 95-102. ISSN 0126-6039

Hamimah Abd.Rahman, and Andanastuti Muchtar, and Norhamidi Muhamad, and Huda Abdullah, (2010) Komposit La1-xSrxCo1-yFeyO3-d (LSCF) sebagai bahan katod tahan lama bagi sel fuel oksida pejal bersuhu sederhana-rendah: ulasan kajian. Jurnal Kejuruteraan, 22 . pp. 1-10.

Shahrir Abdullah, and Norhamidi Muhamad, and Riza Atiq Abdullah O.K. Rahmat, and Baba Md. Deros, and Noorhisham Tan Kofli, and Mardina Abdullah, and Mazlan Mohd. Tahir, and Andanastuti Muchtar, (2009) Penilaian objektif dan hasil program Pendidikan Berasaskan Hasil (OBE): soal selidik majikan industri dan alumni. AJTLHE: ASEAN Journal of Teaching and Learning in Higher Education, 1 (2). pp. 1-8. ISSN 1985-5826

Azami Zaharim, and Mohd Marzuki Mustafa, and Khamisah Jafar, and Norhamidi Muhamad, (2009) Corak pencapaian pelajar kumpulan pertama sistem pendidikan berasaskan hasil Fakulti Kejuruteraan Universiti Kebangsaan Malaysia. AJTLHE: ASEAN Journal of Teaching and Learning in Higher Education, 1 (1). pp. 58-64. ISSN 1985-5826

Muhamad Hussain Ismail, and Norhamidi Muhamad, and Mohd Afian Omar, (2008) Characterization of metal injection molding (MIM) feedstock based on water soluble binder system. Jurnal Kejuruteraan, 20 . pp. 11-18.

Suraya Mohd Tahir, and Ahmad Kamal Ariffin, and Norhamidi Muhamad, and Nik Abdullah Nik Mohamed, (2008) Crack propagation of metal powder compact. Jurnal Kejuruteraan, 20 . pp. 115-124.

Tulus, and Ahmad Kamal Ariffin, and S. Abdullah, and Norhamidi Muhamad, (2008) Heat transfer analysis in magnet housing of linear generator using finite element method. Jurnal Kejuruteraan, 20 . pp. 125-133.